| Gdl 0-2005 |
The Commissioning Process |
| SGPC 0 |
To maintain and revise Gdl 0. Guideline on continuous maintenance |
| GPC 0.2P |
The Commissioning Process for Existing Systems and Assemblies |
| Gdl 1.1-2007 |
HVAC&R Technical Requirements for the HVAC Commissioning Process |
| Gdl 1.1-2007R |
HVAC&R Technical Requirements for the HVAC Commissioning Process |
| GPC 1.2P |
The Commissioning Process for Existing HVAC&R Systems (Formerly GPC 30P) |
| GPC 1.3P |
Building Operation and Maintenance Training for the HVAC&R Commissioning Process (Formerly GPC 31P) |
| GPC 1.4P |
Systems Manual Preparation for the Commissioning Process. |
| GPC 1.5P |
The Commissioning Process for Smoke Control Systems (Formerly GPC 5-1994R) |
| Gdl 2-2010 |
Engineering Analysis of Experimental Data |
| Gdl 4-2008 |
Preparation of Operating and Maintenance Documentation for Building Systems |
| Gdl 5-1994 (RA 2001) |
Commissioning Smoke Management Systems |
| Gdl 6-2008 |
Refrigerant Information Recommended for Product Development and Standards |
| GPC 6-2008R |
Refrigerant Information Recommended for Product Development and Standards |
| Gdl 8-1994 |
Energy Cost Allocation for Multiple-Occupancy Residential Buildings |
| GPC 8-1994R |
Energy Cost Allocation for Multiple-Occupancy Residential Buildings |
| Gdl 10-2010 |
Interactions Affecting the Achievement of Acceptable Indoor Environments |
| SGPC 10P |
To maintain and revise Guideline 10. Guideline on continuous maintenance. |
| Gdl 11-2009 |
Field Testing of HVAC Controls Components |
| Gdl 12-2000 |
Minimizing the Risk of Legionellosis Associated With Building Water Systems |
| GPC 12-2000R |
Minimizing the Risk of Legionellosis Associated With Building Water Systems |
| Gdl 13-2007 |
Specifying Building Automation Systems |
| SGPC 13 |
To maintain and revise Guideline 13. Guideline on continuous maintenance. |
| Gdl 14-2002 |
Measurement of Energy and Demand Savings |
| GPC 14-2002R |
Measurement of Energy, Demand and Water Savings |
| Gdl 16-2010 |
Selecting Outdoor, Return, and Relief Dampers for Air-Side Economizer Systems |
| Gdl 20-2010 |
Documenting HVAC&R Work Processes and Data Exchange Requirements |
| SGPC 20 |
To maintain and revise Gdl 20. Guideline on continuous maintenance |
| GPC 21P |
Guideline for Stationary Battery Room Ventilation and Thermal Conditions |
| Gdl 22-2008 |
Instrumentation for Monitoring Central Chilled Plant Efficiency |
| GPC 22-2008R |
Instrumentation for Monitoring Central Chilled Plant Efficiency (SRS is acting as revision committee) |
| GPC 23P |
Guideline for the Design and Application of Heating, Ventilation and Air Conditioning Equipment for Rail Passenger Vehicles |
| Gdl 24-2008 |
Ventilation and Indoor Air Quality In Low-Rise Residential Buildings |
| GPC 25P |
Method of Measuring Solar-Optical Properties of Materials |
| Gdl 26-2008 |
Guideline for Field Testing of General Ventilation Filtration Devices and Systems for Removal Efficiency In-Situ by Particle Size and Resistance to Airflow |
| GPC 26-2008R |
Guideline for Field Testing of General Ventilation Filtration Devices and Systems for Removal Efficiency In-Situ by Particle Size and Resistance to Airflow (SRS is acting as revision committee) |
| GPC 27P |
Measurement Procedures for Gaseous Contaminants in Commercial Buildings |
| Gdl 28P |
Air Quality Within Commercial Aircraft |
| Gdl 29-2009 |
Guideline for Risk Management of Public Health and Safety in Buildings |
| GPC 32P |
Sustainable, High Performance Operations & Maintenance |
| GPC 33P |
Guideline for Documenting Indoor Airflow and Contaminant Transport Modeling |
| Std 15-2010 |
Safety Standard for Refrigeration Systems (Supersedes ANSI B9.1, Safety Code for Mechanical Refrigeration) and Addenda |
| SSPC 15 |
To maintain and revise Standard 15. Standard on continuous maintenance. |
| Std 16-1983 (RA 2009) |
Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners |
| SPC 16-1983R |
Method of Testing for Rating Room Air Conditioners and Packaged Terminal Air Conditioners |
| Std 17-2008 |
Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves |
| SPC 17-2008R |
Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves |
| Std 18-2008 |
Methods of Testing for Rating Drinking-Water Coolers with Self-Contained Mechanical Refrigeration |
| Std 20-1997 (RA2006) |
Methods of Testing for Rating Remote Mechanical-Draft Air-Cooled Refrigerant Condensers |
| SPC 20-1997R |
Methods of Testing for Rating Remote Mechanical-Draft Air-Cooled Refrigerant Condensers |
| Std 22-2007 |
Methods of Testing for Rating Liquid-Cooled Refrigerant Condensers |
| SPC 22-2007R |
Methods of Testing for Rating Liquid-Cooled Refrigerant Condensers |
| Std 23-2005 |
Methods of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units (Revision of ASHRAE 14 and ASHRAE 23) |
| SPC 23.1-2010 |
Methods of Testing for Performance Rating Positive Displacement Refrigerant Compressors and Condensing Units That Operate at Subcritical Temperatures of the Refrigerant |
| SPC 23.2P |
Method of Test for Rating the Performance of Positive Displacement Compressors that Operate at Supercritical Pressures of the Refrigerants(formerly SPC 186P) |
| Std 24-2009 |
Methods of Testing for Rating Liquid Coolers |
| Std 25-2001 (RA 2006) |
Methods of Testing Forced Convection and Natural Convection Air Coolers for Refrigeration |
| Std 25-2001R |
Methods of Testing Forced Convection and Natural Convection Air Coolers for Refrigeration |
| Std 26-2010 |
Mechanical Refrigeration and Air Conditioning Installations Aboard Ship |
| Std 28-1996 (RA 2010) |
Method of Testing Flow Capacity of Refrigerant Capillary Tubes (SRS is the revision project committee) |
| Std 29-2009 |
Methods of Testing Automatic Ice Makers |
| SPC 29-2009R |
Methods of Testing Automatic Ice Makers |
| Std 30-1995 |
Methods of Testing Liquid Chilling Packages |
| SPC 30-1995R |
Method of Testing Liquid-Chilling Packages |
| Std 32.1-2010 |
Methods of Testing for Rating Vending Machines for Sealed Beverages |
| Std 32.2-2003 (RA 2011) |
Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment |
| Std 33-2000 |
Methods of Testing Forced Circulation Air Cooling and Air Heating Coils |
| SPC 33-2000R |
Methods of Testing Forced Circulation Air Cooling and Air Heating Coils |
| Std 34-2010 And Addenda |
Designation and Safety Classification of Refrigerants |
| SSPC 34 |
To maintain and revise Standard 34. Standard on continuous maintenance. |
| Std 35-2010 |
Method of Testing Desiccants for Refrigerant Drying |
| Std 37-2009 |
Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment |
| Std 40-2002 (RA 2006) |
Methods of Testing for Rating Heat Operated Unitary Air Conditioning and Heat-Pump Equipment |
| SSPC 41 |
Standard Methods of Measurement to maintain and revise each of the 41 series individual standards |
| Std 41.1-1986 (RA 06) |
Standard Methods for Temperature Measurement |
| SPC 41.1-1986R |
Standard Method for Temperature Measurement |
| Std 41.2-1987 (RA 92) |
Standard Methods for Air Velocity and Airflow Measurement |
| SPC 41.2-1987R |
Standard Methods for Laboratory Airflow Measurement |
| Std 41.3-1989 |
Standard Methods for Pressure Measurement |
| SPC 41.3-1989R |
Standard Methods for Pressure Measurement |
| Std 41.4-1996 (RA 2006) |
Standard Methods for Proportion of Lubricant in Liquid Refrigerant Measurement |
| SPC 41.4-1996R |
Standard Method for Measurement of Proportion of Lubricant in Liquid Refrigerant |
| Std 41.6-1994 (RA 2006) |
Standard Method for Measurement of Moist Air Properties |
| SPC 41.6-1994R |
Standard Methods for Humidity Measurement |
| Std 41.7-1984 (RA 2006) |
Method of Test for Measurement of Flow of Gas |
| SPC 41.7-1984R |
Standard Methods for Gas Flow Measurement |
| Std 41.8-1989 |
Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters |
| SPC 41.8-1989R |
Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters |
| Std 41.9-2011 |
Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters |
| Std 41.10-2008 |
Standard Methods for Volatile Refrigerant Mass Flow Measurement Using Flowmeters (Previously 156P) |
| SPC 41.11P |
Standard Methods for Power Measurement |
| Std 51-2007 |
Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (AMCA 210-07) (AMCA was the lead organization for this standard) |
| SPC 51-2007R |
Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (AMCA 210-07) (AMCA was the lead organization for this standard) |
| Std 52.2-2007 |
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size |
| SSPC 52.2 |
To maintain and revise Standard 52.2. Standard on continuous maintenance. |
| Std 55-2010 |
Thermal Environmental Conditions for Human Occupancy |
| SSPC 55 |
To maintain and revise Standard 55. Standard on continuous maintenance. Standard 55 placed on continuous maintenance January 2004 (Anaheim). |
| Std 58-1986 (RA 09) |
Method of Testing for Rating Room Air Conditioner and Packaged Terminal Air Conditioner Heating Capacity |
| SPC 58-1986R |
Method of Testing for Rating Room Air Conditioner and Packaged Terminal Air Conditioner Heating Capacity(Standard is being developed by SPC 16) |
| Std 62.1-2010 and Addenda |
Ventilation for Acceptable Indoor Air Quality |
| SSPC 62.1 |
To maintain and revise Standard 62. Standard on continuous maintenance. Ventilation and Acceptable Indoor Air Quality |
| Std 62.2-2010 and Addenda |
Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings |
| SSPC 62.2 |
To maintain and revise Standard 62.2. Standard on continuous maintenance. |
| Std 63.1-1995 (RA 2001) |
Method of Testing Liquid Line Refrigerant Driers |
| SPC 63.1-1995R |
Method of Testing Liquid Line Refrigerant Driers |
| Std 63.2-1996 (R2010) |
Method of Testing Liquid-Line Filter Drier Filtration Capability |
| Std 64-2011 |
Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers (Supersedes Std 64-2005.) |
| delete |
delete |
| Std 68-1997 |
Laboratory Method of Testing to Determine the Sound Power in a Duct |
| SPC 68-1997R (ANSI/AMCA 330-97) |
(Revision committee approved by StdC 10/12/2010 with same TPS) |
| Std 70-2006 (RA 2011) |
Method of Testing for Rating the Performance of Air Outlets and Air Inlets |
| Std 72-2005 |
Method of Testing Open Refrigerators |
| SPC 72-2005R |
Method of Testing Open and Closed Commercial Refrigerators and Freezers |
| Std 74-1988 |
Method of Measuring Solar-Optical Properties of Materials |
| Std 78-1985 (RA 2007) |
Method of Testing Flow Capacity of Suction Line Filters and Filter-Driers |
| Std 79-2002 (RA 2006) |
Methods of Testing for Rating Room Fan-Coil Conditioners |
| SPC 79-2002R |
Methods of Testing for Fan-Coil Conditioners |
| Std 84-2008 |
Method of Testing Air-to-Air Heat Exchangers |
| SPC 84-2008R |
Method of Testing Air-to-Air Heat Exchangers |
| Std 86-1994 (RA 2006) |
Methods of Testing the Floc Point of Refrigeration Grade Oils |
| SPC 86-1994R |
Methods of Testing the Floc Point of Refrigeration Grade Oils |
| Std 87.2-2009 |
In-Situ Method of Testing Propeller Fans for Reliability (Previously 144P) |
| Std 87.3-2001 (RA 2010) |
Method of Testing Propeller Fan Vibration - Diagnostic Test Methods (SRS is the revision project committee) |
| Std 90.1-2010 And Addenda |
Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings |
| SSPC 90.1 |
To maintain and revise Standard 90.1. Standard on continuous maintenance. |
| Std 90.2-2007 And Addenda |
Energy Efficient Design of Low-Rise Residential Buildings |
| SSPC 90.2 |
To maintain and revise Standard 90.2. Standard on continuous maintenance. |
| Std 93-2010 |
Methods of Testing to Determine the Thermal Performance of Solar Collectors |
| Std 94.1-2010 |
Method of Testing Active Latent-Heat Storage Devices Based on Thermal Performance |
| Std 94.2-2010 |
Method of Testing Thermal Storage Devices with Electrical Input and Thermal Output Based on Thermal Performance |
| Std 94.3-2010 |
Method of Testing Active Sensible Thermal Energy Devices Based on Thermal Performance |
| Std 95-1981 (RA 87) |
Methods of Testing to Determine the Thermal Performance of Solar Domestic Water Heating Systems |
| Std 96-1980 (RA 89) |
Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors |
| SPC 96-1980R |
Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors |
| Std 97-2007 |
Sealed Glass Tube Method to Test the Chemical Stability of Materials for Use Within Refrigerant Systems |
| SPC 97-2007R |
Sealed Glass Tube Method to Test the Chemical Stability of Materials for Use Within Refrigerant Systems |
| Std 99-2006 |
Refrigeration Oil Description SPC 99-1981R Refrigeration Oil Description |
| SPC 99-2006R |
Refrigeration Oil Description SPC 99-1981R Refrigeration Oil Description |
| Std 100-2006 |
Energy Conservation in Existing Buildings |
| SPC 100-2006R |
Energy Efficiency in Existing Buildings |
| Std 103-2007 |
Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers |
| Std 105-2007 |
Standard Methods of Measuring, Expressing, and Comparing Building Energy Performance |
| SPC 105-2007R |
Standard Methods of Determining, Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions |
| Std 110-1995 |
Method of Testing Performance of Laboratory Fume Hoods |
| SPC 110P |
Method of Testing Performance of Laboratory Fume Hoods |
| Std 111-2008 |
Measurement, Testing, Adjusting and Balancing of Building Heating, Ventilation and Air-Conditioning Systems |
| SPC 111-2008R |
Measurement, Testing, Adjusting and Balancing of Building Heating, Ventilation and Air-Conditioning Systems |
| Std 113-2009 |
Method of Testing for Room Air Diffusion |
| Std 116-2010 |
Methods of Testing for Rating Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps |
| Std 118.1-2008 |
Method of Testing for Rating Commercial Gas, Electric, and Oil Service Water Heating Equipment |
| SPC 118.1-2008R |
Method of Testing for Rating Commercial Gas, Electric, and Oil Service Water Heating Equipment |
| Std 118.2-2006 |
Method of Testing for Rating Residential Water Heaters |
| SPC 118.2-2006R |
Method of Testing for Rating Residential Water Heaters |
| Std 119-1988 (RA 2004) |
Air Leakage Performance for Detached Single-Family Residential Buildings |
| SPC 119-1988R |
Air Leakage Performance for Detached Single-Family Residential Buildings |
| Std 120-2008 |
Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings |
| SPC 120-2008R |
Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings |
| Std 124-2007 |
Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances |
| SPC 124-2007R |
Methods of Testing for Rating Combination Space-Heating and Water-Heating Appliances |
| Std 125-1992 (RA 2011) |
Method of Testing Thermal Energy Meters for Liquid Streams in HVAC Systems |
| Std 126-2008 |
Methods of Testing HVAC Air Ducts |
| SPC 126-2008R |
Methods of Testing HVAC Air Ducts |
| Std 127-2007 |
Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners |
| SPC 127-2007R |
Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners |
| Std 128-2011 |
Method of Rating Portable Air Conditioners |
| Std 129-1997 (RA 2002) |
Measuring Air Change Effectiveness |
| SPC 129-1997R |
Measuring Air Change Effectiveness |
| Std 130-2008 |
Methods of Testing for Rating Ducted Air Terminal Units |
| SPC 130-2008R |
Methods of Testing for Rating Ducted Air Terminal Units |
| Std 133-2008 |
Method of Testing Direct Evaporative Air Coolers |
| SPC 133-2008R |
Method of Testing Direct Evaporative Air Coolers |
| Std 134-2005 |
Graphic Symbols for Heating, Ventilating, Air Conditioning and Refrigerating Systems |
| Std 135-2010 And Addenda |
BACnet - A Data Communication Protocol for Building Automation and Control Networks |
| SSPC 135 |
To maintain and revise Standard 135. Standard on continuous maintenance. |
| Std 135.1-2009 |
Method of Test for Conformance to BACnet |
| SSPC 135 |
Responsible for the maintenance and revision of Standard 135.1. Standard on continuous maintenance. |
| Std 136-1993 (RA 2006) |
Method of Determining Air Change Rates in Detached Dwellings |
| Std 136-1993R |
Method of Determining Air Change Rates in Detached Dwellings (Standard is being developed by SSPC 62.2) |
| SSPC 62.2 |
To maintain and revise Standard 136. Standard on periodic maintenance |
| Std 137-2009 |
Methods of Testing for Efficiency of Space-Conditioning/Water-Heating Appliances that Include a Desuperheater Water Heater |
| Std 138-2009 |
Method of Testing for Rating Ceiling Panels for Sensible Heating and Cooling |
| Std 139-2007 |
Method of Testing for Rating Desiccant Dehumidifiers Utilizing Heat for the Regeneration Process |
| Std 140-2007 |
Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs |
| SSPC 140 |
To maintain and revise Standard 140. Standard on continuous maintenance. Standard 140 placed on continuous maintenance January 2004 (Anaheim). |
| Std 143-2007 |
Method of Testing for Rating Indirect Evaporative Coolers |
| SPC 143-2007R |
Method of Testing for Rating Indirect Evaporative Coolers |
| SPC 145P |
Test Method for Assessing the Performance of Gas Phase Air Cleaning Equipment |
| SPC 145.1-2008 |
Laboratory Method for Assessing the Performance of Gas-Phase Air Cleaning Systems: Loose Granular Media |
| Std 145.2-2011 |
Laboratory Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems: Air Cleaning Devices |
| Std 146-2006 |
Method of Testing and Rating Pool Heaters |
| Std 147-2002 |
Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems |
| SPC 147-2002R |
Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems |
| Std 149-2000(RA 2009) |
Laboratory Methods of Testing Fans Used to Exhaust Smoke in Smoke Management Systems |
| Std 150-2000 (RA 2004) |
Method of Testing the Performance of Cool Storage Systems |
| Std 150-2000R |
Method of Testing the Performance of Cool Storage Systems |
| Std 151-2010 |
Practices for Measuring, Testing, Adjusting, and Balancing Shipboard HVAC&R Systems |
| Std 152-2004 |
Ventilation for Commercial Cooking Operations |
| SPC 152-2004R |
Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distributions Systems |
| SPC 153P |
Method of Test for Mass Flow Capacity of Four-Way Refrigerant Reversing Valves |
| Std 154-2011 |
Ventilation for Commercial Cooking Operations |
| SPC 155P |
Method of Testing for Rating Commercial Space Heating Boiler Systems |
| Std 158.1-2004 |
Methods of Testing Capacity of Refrigerant Solenoid Valves |
| SPC 158.1-2004R |
Methods of Testing Capacity of Refrigerant Solenoid Valves |
| Std 158.2-2011 |
Methods of Testing Capacity for Refrigerant Pressure Regulators |
| Std 160-2009 |
Criteria for Moisture-Control Design Analysis in Buildings |
| SSPC 160 |
To maintain and revise Standard 160, Standard on continuous maintenance. |
| Std 161-2007 |
Air Quality Within Commercial Aircraft |
| SSPC 161 |
To maintain and revise Standard 161 Standard on continuous maintenance. Standard on continuous maintenance. . |
| SPC 164 |
Methods of Test for Humidifiers |
| Std 164.1-2008 |
Method of Test for Residential Central System Humidifiers |
| Std 164.1-2008R |
Method of Test for Residential Central System Humidifiers |
| SPC 164 |
To revise Standard 164.1-2008R |
| SPC 164.2P |
Methods of Test for Self-Contained Residential Humidifiers |
| SPC 164 |
To revise Standard 164.2 |
| SPC 164.3P |
Method of Test for Commercial and Industrial Humidifiers |
| SPC 164 |
To revise Standard 164.3 |
| SPC 166P |
Heating, Ventilating, Air-Conditioning and Refrigerating Terminology |
| Std 169-2006 |
Climatic Data for Building Design Standards |
| SSPC 169 |
To maintain and revise Standard 169. Standard on continuous maintenance |
| Std 170-2008 |
Ventilation of Health Care Facilities |
| SSPC 170 |
To maintain and revise Standard 170, Standard on continuous maintenance. Placed on continuous maintenance June 2008 |
| Std 171-2008 |
Method of Test of Seismic Restraint Devices for HVAC&R Equipment |
| SPC 171-2008R |
Method of Test of Seismic Restraint Devices for HVAC&R Equipment |
| SPC 172P |
Method of Test for Insoluble Materials in Synthetic Lubricants and HFC Refrigerant Systems |
| SPC 173P |
Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detectors |
| Std 174-2009 |
Method of Test for Rating Desiccant-Based Dehumidification Equipment |
| SPC 175P |
Metal Pressure Vessel Method to Test Materials Used in Refrigeration Systems |
| SPC 177P |
Method of Test for Measuring Fractionated Compositions of Refrigerant Blends |
| SPC 179P |
Methods of Test for Life Testing Positive Displacement Refrigerant Compressors |
| Std 180-2008 |
Standard Practice for Inspection and Maintenance of Commercial Building HVAC Systems |
| SSPC 180 |
To maintain and revise Standard 180. Standard on continuous maintenance |
| SPC 181P |
Methods of Testing Liquid-to-Liquid Heat Exchangers |
| Std 182-2008 |
Method of Testing Absorption Water-Chilling and Water-Heating Packages |
| Std 183-2007 (RA 2011) |
Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings |
| SPC 184P |
Method of Test for Field Test of Liquid-Chilling Systems |
| SPC 185.1P |
Method of Testing UVC Lights for Use in Air Handling Units or Air Ducts to Inactivate Airborne Microorganisms |
| SPC 185.2P |
Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces |
| SPC 188P |
Prevention of Legionellosis Associated with Building Water Systems |
| Std 189.1-2009 |
Standard for the Design of High-Performance, Green Buildings Except Low-Rise Residential Buildings |
| SSPC 189.1 |
To maintain and revise Standard 189.1. Standard on continuous maintenance. Placed on continuous maintenance June 2008 |
| SPC 189.3P |
Design, Construction and Operation of Sustainable High Performance Health Care Facilities |
| SPC 190P |
Method of Testing for Rating Indoor Pool Dehumidifiers |
| SPC 191P |
Standard for the Conservation of Water Use in Building, Site and Mechanical Systems |
| Std 193-2010 |
Method of Test for Determining the Airtightness of HVAC Equipment |
| SPC 194P |
Method of Test for Direct-Expansion Ground Source Heat Pumps |
| SPC 195P |
Method of Test for Rating Air Terminal Unit Controls |
| SPC 196P |
Method of Test for Measuring Refrigerant Leak Rates |
| SPC 197P |
Method of Test for Attenuation Characteristics of Vibration Isolators |
| SPC 198P |
Method of Test for Rating DX-Dedicated Outdoor Air Systems for Moisture Removal Capacity and Moisture Removal Efficiency |
| SPC 199P |
A Method of Test for Rating the Performance of Industrial Pulse Cleaned Dust Collectors |
| SPC 200P |
Method of Testing for Performance Rating of Chilled Beams |
| SPC 201P |
Facility Smart Grid Information Model |
| SPC 202P |
Commissioning Process for Buildings and Systems |
| SPC 203P |
Method of Test for Determining Heat Gain of Office Equipment Used in Buildings |
| SPC 204P |
Method of Test for Rating Micro Combined Heat and Power Devices |
| SPC 205P |
Standard Representation of Performance Simulation Data for HVAC&R and Other Facility Equipment |
| SPC 206P |
Method of Testing for Rating of Multi-Purpose Heat Pumps for Residential Space Conditioning and Water Heating |
| SPC 207P |
Laboratory Method of Test of Fault Detection and Diagnostics Applied Commercial Air-Cooled Packaged Systems |
| SPC 208P |
Method of Test for Determining Hydronic System Balance Valve Capacity |
| SPC 209P |
Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings |
| SPC 210P |
Method of Testing for Rating Commercial Walk-in Refrigerators and Freezers |