| Project Number |
Title |
| GPC 7P |
Capacity Measurement of Field-Erected Compression-Type Refrigeration and Air Conditioning Systems (Proposed guideline project authorized 6/09/1990 to replace ANSI/ASHRAE 83-1985. Discontinued 6/27/1992.) |
| GPC 9P |
Procedure for Estimating the Impact of the Choice of Fuels and Energy Sources Required for Building Systems (Proposed guideline project authorized 1/19/1991 to replaced SPC 112P that was revising 90C. Discontinued 6/27/1992.) |
| GPC 15P |
Thermal and Air Intrusion Considerations in the Design of Roofs, Walls and Floors (Lack of interest in the project, no full committee, and no work done since 1994.) (Discontinued Jan. 2008) |
| GPC 17P |
Sampling of Airborne Particle Concentrations in Commercial and Residential Buildings (Proposed standard project authorized 10/29/1995. Discontinued June 2010, Albuquerque) |
| GPC 18P |
Design Guidance for Energy Efficient Buildings (Proposed guideline project authorized 6/19/1999 as a companion document to ANSI/ASHRAE/IESNA Standard 90.1. Disbanded 7/2/2003, Kansas City) |
| GPC 19P |
Ventilation and Indoor Air Quality (Proposed guideline authorized 10/17/1999) Withdrawn because an advanced IAQ Guide is being written that will contain the same material that would have been placed in the guideline (Discontinued June 2007) |
| SPC 95P |
Methods of Testing to Determine the Thermal Performance of Solar Domestic Water Heating Systems (Proposed standard project authorized 10/21/1989. Discontinued June 2010, Albuquerque) |
| SPC 109P |
Methods of Testing to Determine the Thermal Performance of Flat-Plate Solar Collectors Containing a Boiling Liquid
(Withdrawn NY 2008 for failure to form a project committee ) |
| SPC 110.2P |
Method of Test for Bio Safety Cabinets. Discontinued project approved by Standards Committee 10/2/2005 for failure to form a committee. |
| SPC 131P |
Method of Testing Four-Way Heat Pump Reversing Valves (Returned to TC 8.8 for further research) |
| SSPC 141P |
Methods of Test for Rating Indirect Evaporative Coolers. (No project committee as all the member rolled off in 2003 and an ISO standard on the same subject is being drafted) (Discontinued Jan. 2008) |
| SPC 142P |
Standard method for Determining and Expressing the Heat Transfer and Total Optical Properties of Fenestration Products (Proposed standard project authorized 1/28/1989. Discontinued due to an ISO standard on the same topic and lack of support. Discontinued and disbanded 9/29/2006.) |
| SPC 144P |
Redesignated as SPC 87.2P. |
| SPC 145.3 |
Field Test Method for Assessing the Performance of Gas-Phase Air Cleaning Systems: Installed Systems (Proposed standard project authorized 6/1/2002. Disbanded June 2010, Albuquerque.) |
| SPC 148P |
Method of Testing for Rating Movable, Single-Package Air Conditioners (Proposed standard project authorized 1/25/1992. SPC 148P discontinued 6/26/1993 for lack of industry support.) |
| SPC 156P |
Now SPC 41.10P. (Discontinued March 1999) |
| SPC 157P |
Methods of Testing for Rating Mechanical Transport Refrigeration Units (Proposed project committee authorized 2/01/1995; Standard Committee voted to disband 6/24/2000) |
| SPC 159P |
Methods of Testing for Rating Pressure Regulating Valves (Combined with SPC 158P, Methods of Testing for Rating Refrigerant Solenoid Valves, to prepare Standards 158.1P and 158.2P; 2/05/2000, Dallas) (Products covered by these methods of tests (MOTs) are similar and thus committee membership can be largely the same.) |
| SPC 162P |
Methods of Testing Dampers Used in Smoke Management Systems (Proposed project committee authorized 95/10/29; Standards Committee voted to disband 10/17/1999 and again 6/24/2000; It was the consensus of the project committee that the issues are adequately addressed in AMCA 500D, UL 555, and UL 555S.) |
| SPC 163P |
Methods of Testing the Performance of Non-Condensable Gas Purge Equipment for Use with Low Pressure Centrifugal Chillers (Proposed project committee authorized 10/29/1995; Standards Committee voted to discontinue project 10/16/2001; Very narrow topic. Difficult to form a project committee.) |
| SPC 165P |
Methods of Testing Ice Storage Bins (Proposed standard project committee authorized 10/29/1995. SPC 165P discontinued 1/17/1998 for lack of interest and support for manning project committee.) |
| SPC 167P |
Model Safety Code for Mechanical Installations (Proposed project committee authorized 10/20/1996; Standards Committee voted to disband 10/17/1999; Lack of interest. No project committee formed) |
| SPC 168P |
SI Usage in Heating Ventilating, Air Conditioning and Refrigerating (Proposed standard project authorized 1/29/1997. SPC 168P discontinued 1/17/1998 for lack of interest and support for manning project committee.) |
| SPC 176P |
Method of Testing for Determination of Electrical Properties of Refrigerants (Discontinued March 2006 for failure to form a committee) - Content is to be included in Standard 172. |
| SPC 178P |
Method of Test for Commercial and Industrial Humidifiers (This project is discontinued because the same subject is being covered in Standard 164.3P) |
| SPC 186P |
Method of Test for Rating Positive Displacement Compressors that Operate at Supercritical Temperatures of the Refrigerants. (This was renumbered to SPC 23.2P. January 2010 |
| SPC 187P |
Method of Test for Determination of Electrical Properties of Refrigerants (Project discontinued 7/3/2006 for failure to form a committee.) |
| SPC 192P |
Method of Testing for Rating Desuperheater/Water Heaters(Project discontinued January 2010 for failure to form a committee.) |