Shaping Tomorrow's Built Environment Today

HVAC Design: Level II, Applications
Lisbon, Portugal, November 2019

Share This

HVAC Design: Level II, Applications - Lisbon, Portugal, November 2019

  • 21 Nov 2019 – 22 Nov 2019
  • Portuguese Engineers Association (Ordem dos Engenheiros)
    Avenida António Augusto de Aguiar, Nº 3-D, 1069-030
    Lisboa, Portugal
    Level II: 21-22 Nov

REGISTER NOW

Course Description

Lisbon, Portugal | 21-22 November 2019

Click the tabs below for pricing and additional details.

This November, ASHRAE will present HVAC Design: Level II – Applications in Lisbon, Portugal for the first time. This two-day course will take place 21-22 November 2019. While the fundamentals of good design practices are universal, the training has been adapted to meet the specific needs of European designers, whether they practice only in Europe or in areas were US standards are also applied.

This course is offered in conjunction with Data Center Design Training in Lisbon, 20 Nov.

Register for both courses and get discounted (combo) pricing!

ASHRAE is a continuing education partner with CPD

Sponsored by Carrier
  • Fees

    Registration Fees

    (Register by 28 Oct  2019 for Early Bird pricing)

    Data Center Design from ASHRAE TC 9.9 - 20 Nov
    Member Non-Member Group 3+
    Early Bird $219 $299  
    Standard $275 $365 $219
    Level II –Applications - 21-22 Nov
    Member Non-Member Group 3+
    Early Bird $449 $549
    Standard $569 $669 $449
    Combo – Data Center Design & Level II - 20-22 Nov
    Member Non-Member Group 3+
    Early Bird   $636 $739
    Standard $795 $895 $636

    Fee Covers: Course admittance, course materials, bonus resources and content as described, certificate of attendance, break refreshments, and lunches.


    Company Discount:

    Enroll 2 or more participants from the same company at the same time and save.

    Company Form

    Contact edu@ashrae.org for more details


    Transfer, Cancellation and Refund Policy:

    Registration fees will be refunded in full if cancellation is received by ASHRAE Learning Institute at least 30 days prior to the training date. Cancellations received 15–29 days prior to the training date are subject to a $150 cancellation fee. Registrants who do not attend the training or who cancel less than 15 days prior to the training date are liable for the entire registration fee. A substitute registrant may be enrolled at any time by contacting Tewana Parris at edu@ashrae.org, or by phone at +1 (678)549-2121. Member/Non-Member rates will apply to the substitute registrant.

  • Level II

    The greatest challenge facing engineering firms and building owners is maintaining a work force that understands the fundamentals of HVAC design and that is current with the application of new technologies. To address this need, ASHRAE developed the HVAC Design: Level II – Applications training. The training is tailored for engineers with advanced experience in the HVAC design field, or those who have completed HVAC Design: Level I – Essentials. Developed by industry-leading professionals, the training provides advanced information that allows practicing engineers and designers an opportunity to expand their exposure to HVAC systems design procedures for a better understanding of system options to save energy.


    Course Topics Include:

    • Designing, installing and maintaining HVAC systems
    • Thermal Environmental Conditions for Human Occupancy, ASHRAE Standard 62.1, Ventilation for Acceptable Indoor Air Quality, and ASHRAE/IES Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings
    • Using ASHRAE’s Advanced Energy Design Guides
    • Increasing energy savings while improving indoor environmental quality

    Course Objectives:

    • Design HVAC systems to meet owners’ requirements
    • Provide installation & maintenance guidance to meet design objectives
    • Improve energy efficiency & IEQ through application of ASHRAE standard
    • Achieve high performing building design objectives through application for various building type
  • Instructors
    Charlie Henck-200x240.jpg

    Charlie Henck, P.E., Fellow/Life Member ASHRAE, CEM, LEED AP
    As a former design engineer, project manager, and department head during his career, Charlie Henck, P.E., Fellow/Life Member, both designed and renovated healthcare systems, office buildings, laboratories, data centers, and more. Henck has served on many ASHRAE committees and acted as past Director and Regional Chair (DRC) for Region III. He is the current chair of the Professional Development Committee (PDC) and secretary for Technical Committee (TC) 9.1, Large Building Air-Conditioning Systems. Henck wrote, edited, and revised portions of ASHRAE Laboratory Design Guide, Second Edition, with a focus on air treatment, particularly the requirements for allowable concentration limits and the technologies available to achieve acceptable levels. Henck is also actively involved in revising portions of ASHRAE Handbook—HVAC Systems and Equipment.


    Jose Luis Alexandre-200x240.jpg

    José Luís Alexandre, Ph.D., Member ASHRAE
    currently works at the Departamento de Engenharia Mecânica, University of Porto. Dr. Alexandre does research in Mechanical Engineering, Environmental Engineering and Industrial Engineering. His most recent publication is 'Energy Certification Label vs. Passive Discomfort Index for existing dwellings'

  • Testimonials
    Testimonials

    “The course met my expectations. It will be useful in the process of accepting new HVAC systems. It was very interesting to know the knowledge and practices of other countries.”
    – António G. – Porto, Portugal

    “The training has giving me general knowledge of HVAC systems. In my company, we are focused on AHU’s manufacturing, and it is always good to know all the systems in the market.”
    – Francisco A, Zaragoza, Spain

    “I think that this course was a good start to better my understanding of how the systems are designed to make it easier to find problems and solve them.”
    - Jorge R. – Madrid, Spain

    “This course is a really good opportunity for me to understand the whole range of HVAC equipment.”
    – Adrian G. – Zaragoza, Spain

    “ASHRAE’s HVAC Design Training is perfect for a person who’s not familiarized within this subject, such as building owners, maintenance, and people of other engineering areas.”
    – Joao da S. – Coimbra, Portugal

    “It was a good opportunity to deepen HVCA and related issues.”
    – José M. – Caldas da Rainha, Portugal

    “This is a very good course in introducing the basics of all steps included in the design process for the ones who do not have experience in the area.”
    – Catia F. – Lisbon, Portugal

    “I would recommend this training to every designer/engineer related within HVAC market. The instructors are well-known professionals and are open to share real information about real applications”
    – Iván G. – Madrid, Spain

    “The course has been very useful for me. It was an opportunity to share knowledge with other colleagues and to learn a lot of things that was unknown.”
    – José L. – Madrid, Spain

    “It was a good experience to learn new standards and to refresh some concepts.
    – Teago T. - Lisbon, Portugal

    “The course was very interesting and enlightening in both the technical and ethical aspects. I strongly recommend”
    – Fernando V. — Lisbon, Portugal

  • Location

    Portuguese Engineers Association (Ordem dos Engenheiros)
    Avenida António Augusto de Aguiar, Nº 3-D, 1069-030
    Lisboa, Portugal

Close