Shaping Tomorrow's Built Environment Today

HVAC Design Training Tampa June 2019

Share This

HVAC Design Training: Level I Tampa June 2019

  • 03 Jun 2019 – 05 Jun 2019
  • Tampa, FL
    Level I

REGISTER NOW

Course Description

Tampa | June 3 – 5, 2019

ASHRAE offers HVAC Design: Level I – Essentials June 3–5.

Click the tabs below for pricing and additional details.

  • Fees

    Registration Fees

    (Register 30 days prior to training date, for Early Bird pricing)

    Level I – Essentials Member Non-Member Group 3+
    Early Bird $959 $1,214
    Standard $1,009 $1,264 $909

    Fee Covers: Course admittance, course materials, publications, break refreshments, and lunches.

    Company Discount Fee: Enroll 3 or more participants from the same company at the same time and save. Email Gabrielle Gaston (ggaston@ashrae.org) for group registration assistance.


    Cancellation Policy

    Registration fees will be refunded in full if cancellation is received by ASHRAE Learning Institute at least 30 days prior to the training date. Cancellations received 15–29 days prior to the training date are subject to a $150 cancellation fee. Registrants who do not attend the training or who cancel less than 15 days prior to the training date are liable for the entire registration fee. A substitute registrant may be enrolled at any time by contacting Gabrielle Gaston by phone at 678-539-2121 or email ggaston@ashrae.org. Member/Non-Member rates will apply to the substitute registrant.

  • Level I

    HVAC Design: Level I – Essentials

    ASHRAE’s HVAC Design: Level I – Essentials training provides participants with instruction that accelerates their transformation into effective members of a design, construction or facilities maintenance team. Developed by industry-leading professionals selected by ASHRAE, the training provides attendees with the fundamentals and technical aspects of HVAC design. Attendees will gain practical skills and knowledge to design and maintain HVAC systems that can be put to immediate use.

    In addition to gaining in-depth knowledge and understanding, attendees will receive real-world examples of HVAC systems based on the renovated ASHRAE Headquarters building. The training also teaches a systematic approach to guide a design team to a solution that optimally meets the client’s expectations. Engineered drawings of the ASHRAE Headquarters renovation will also be discussed so participants are exposed to plan reading and visual understanding of system design.


    Who Should Attend

    • Engineers new to the HVAC industry, including recent engineering graduates lacking practical experience
    • Facilities managers involved in new construction or major renovation projects
    • Technicians who would like to gain design knowledge
    • Architects who want to understand HVAC system design
    • Sales engineers and HVAC equipment suppliers who want to gain a broad knowledge of HVAC systems

    How Your Firm Will Benefit

    The training helps attendees understand:

    • The need to improve overall building performance
    • The technologies that lead to improved building performance
    • The economics of sustainable buildings and the roles of the designer and facilities manager
    • The basic skills needed to design high-performance buildings
    • The skill set that will be required by designers of the future
    • Techniques to interact effectively with all design partners (architects, owners, other engineering disciplines) in an integrated design team
    • The capacity to participate in the design of high-performance buildings

    Primary References

    ASHRAE Handbooks – Applications, Fundamentals

    Standard 62.1 – Ventilation for Acceptable Indoor Air Quality

    Duct Calculator


    Bonus – Free Copy of ASHRAE Duct Size Calculator (I-P and SI Units)

    Duct Size Calculator

    Attendees each receive a free copy of Duct Size Calculator (I-P & SI).

    Learn more about this valuable tool

  • Level I Outline

    Level I Outline

    Day 1

    8:00 Introductions
    8:15 Fundamentals
    9:15 Load Calculation
    10:00 Break
    10:10 Load Calculation (cont.)
    11:30 Q&A Session
    11:45 Lunch
    12:30 Psychrometrics
    2:10 Break
    2:20 Psychrometrics (cont.)
    3:10 Break
    3:20 System Selection 
    5:00 Wrap-up/Adjourn

    Day 2

    8:00 Design Process
    9:00 Basic Design of Air Systems
    10:00 Break
    10:15 Basic Design of Air Systems (cont.)
    11:30 Q&A Session
    11:45 Lunch
    12:30 Basic Design of Air Systems (cont.)
    1:00 Basic Design of Hydronic Systems
    2:15 Break
    2:25 HVAC Equipment
    3:30 Break
    3:40 HVAC Equipment (cont.)
    4:45 Q&A Session
    5:00 Wrap-up/Adjourn

    Day 3

    8:00 HVAC Systems
    10:00 Break
    10:15 HVAC Systems (cont.)
    11:00 Codes and Standards
    11:30 Q&A Session
    11:45 Lunch
    12:30 BAS Controls
    1:30 Commissioning and ASHRAE 180
    2:15 Break
    2:30 Introduction to Technical Sales
    3:30 Project Management
    4:00 Q&A Session/Adjourn

    PDH and Continuing Education Units

    ASHRAE is an approved Continuing Education provider for the American Institute of Architects (AIA) and a USGBC Education Partner. Continuing Education hours earned from ASHRAE courses may be applied toward renewal of state-licensed professionals and maintenance of LEED® professional credentials.

    Attendees of HVAC Design: Level I will earn up to 18 Professional Development Hours (PDHs).

  • Instructors
    Keen_Julia-150x180.jpg

    Julia Keen, Ph.D., P.E., Fellow ASHRAE, HBDP, BEAP

    Julia Keen is a Professor of Architectural Engineering and Construction Science at Kansas State University with a specialty in HVAC, energy codes and integrated building design. She has a Ph.D. in Curriculum and Instruction from Kansas State University where she also received a Bachelor's and Master's degrees in Architectural Engineering. She also owns her own consulting engineering company Keen Designs, PA. Julia is a licensed Professional Engineer and an ASHRAE-certified High-Performance Building Design Professional (HBDP) and Building Energy Assessment Professional (BEAP). She currently serves on ASHRAE’s Planning and Building EQ standing committees, and she is past-chair of Technical Committee 6.1 Hydronics and Steam.


    Joel Primeau-150x180.jpg

    Joel Primeau, Eng., ASHRAE Member, HBDP, LEED® AP

    Joel Primeau is a consulting engineer with over 30 years of HVAC experience. He has lead and assisted teams of engineers and technicians in the design and construction of high-performance, sustainable facilities.

    Joel’s experience spans a wide range of engineering design and construction projects. His expertise is in the design of high-efficiency HVAC systems that enhance indoor air quality and comfort.

    Joel frequently trains engineers, architects and facility managers on the design process, central heating and chilling plant optimization, high-performance HVAC systems, and heat recovery applications.

    Joel is a Licensed Professional Engineer, ASHRAE Certified High-Performance Building Design Professional (HBDP), and a LEED® Accredited Professional. He earned a BEng in Mechanical Engineering from the Royal Military College in Kingston, Canada. After a brief career as an army engineer, Joel has since worked in the HVAC industry in consulting, facilities management and technical sales.

  • Location

    Training Location:
    Trane - Adamo Supply Center
    4720 E. Adamo Dr.
    Tampa, FL 33605

Close