Shaping Tomorrow's Built Environment Today

HVAC Design Training Toronto May 2019

Share This

HVAC Design Training: Levels I and II, Toronto May 2019

  • 20 May 2019 – 24 May 2019
  • Toronto, ON
    Level II Only: May 23-24, 2019

REGISTER NOW

Course Description

Toronto | May 23 – 24, 2019

HVAC Design: Level II – Applications May 23–24 in Toronto, ON is still available.

HVAC Design: Level I – Essentials May 20–22 and the COMBO of Levels I and II  are SOLD OUT

Click the tabs below for pricing and additional details.

  • Fees

    Registration Fees

    (Register 30 days prior to training date, for Early Bird pricing)

    Level II – Applications Member Non-Member Group 3+
    Early Bird $649 $804  
    Standard $699 $854 $599
     

    Fee Covers: Course admittance, course materials, publications, break refreshments, and lunches.

    Company Discount Fee: Enroll 3 or more participants from the same company at the same time and save. Email Gabrielle Gaston (ggaston@ashrae.org) for group registration assistance.


    Cancellation Policy

    Registration fees will be refunded in full if cancellation is received by ASHRAE Learning Institute at least 30 days prior to the training date. Cancellations received 15–29 days prior to the training date are subject to a $150 cancellation fee. Registrants who do not attend the training or who cancel less than 15 days prior to the training date are liable for the entire registration fee. A substitute registrant may be enrolled at any time by contacting Gabrielle Gaston by phone at 678-539-2121 or email ggaston@ashrae.org. Member/Non-Member rates will apply to the substitute registrant.

  • Level I Outline

    Level I Outline

    Day 1

    8:00 Introductions
    8:15 Fundamentals
    9:15 Load Calculation
    10:00 Break
    10:10 Load Calculation (cont.)
    11:30 Q&A Session
    11:45 Lunch
    12:30 Psychrometrics
    2:10 Break
    2:20 Psychrometrics (cont.)
    3:10 Break
    3:20 System Selection 
    5:00 Wrap-up/Adjourn

    Day 2

    8:00 Design Process
    9:00 Basic Design of Air Systems
    10:00 Break
    10:15 Basic Design of Air Systems (cont.)
    11:30 Q&A Session
    11:45 Lunch
    12:30 Basic Design of Air Systems (cont.)
    1:00 Basic Design of Hydronic Systems
    2:15 Break
    2:25 HVAC Equipment
    3:30 Break
    3:40 HVAC Equipment (cont.)
    4:45 Q&A Session
    5:00 Wrap-up/Adjourn

    Day 3

    8:00 HVAC Systems
    10:00 Break
    10:15 HVAC Systems (cont.)
    11:00 Codes and Standards
    11:30 Q&A Session
    11:45 Lunch
    12:30 BAS Controls
    1:30 Commissioning and ASHRAE 180
    2:15 Break
    2:30 Introduction to Technical Sales
    3:30 Project Management
    4:00 Q&A Session/Adjourn

    PDH and Continuing Education Units

    ASHRAE is an approved Continuing Education provider for the American Institute of Architects (AIA) and a USGBC Education Partner. Continuing Education hours earned from ASHRAE courses may be applied toward renewal of state-licensed professionals and maintenance of LEED® professional credentials.

    Attendees of HVAC Design: Level I will earn up to 18 Professional Development Hours (PDHs).

  • Level II

    HVAC Design: Level II – Applications

    ASHRAE’s HVAC Design: Level II – Applications training provides participants with instruction on HVAC system design. The training is tailored for engineers with advanced experience in the HVAC design field, or those who have completed HVAC Design: Level I – Essentials. Developed by industry-leading professionals, the training provides advanced information that allows practicing engineers and designers an opportunity to expand their exposure to HVAC systems design procedures for a better understanding of system options to save energy.


    Who Should Attend

    • Engineers with HVAC design experience (3–10 years)
    • Participants who attended the HVAC Design: Level I – Essentials
    • Architects who want an in-depth understanding of HVAC design
    • Facilities managers involved in new construction or major renovation projects
    • Technicians who would like to gain thorough design knowledge
    • Construction project managers involved with mechanical systems

    How Your Firm Will Benefit

    The training allows practicing engineers and designers the opportunity to refresh their skills, as well as, expand their exposure to systems and design procedures. Attendees not practicing as designers will be provided with insights into the design process and challenges along with a better understanding of HVAC system options with buildings.


    Primary References

    Advanced Energy Design Guides

    Standard 55–Thermal Environmental Conditions for Human Occupancy

    Standard 62.1–Ventilation for Acceptable Indoor Air Quality

    Standard 90.1–Energy Standard for Buildings

    Standard 189.1–Design of High-Performance Green Buildings


    Bonus – Free Copy of ASHRAE GreenGuide: The Design, Construction, and Operation of Sustainable Buildings, 5th ed.

    ASHRAE-D-90326--150x219.png

    Attendees receive a free copy of ASHRAE GreenGuide: Design, Construction, and Operation of Sustainable Buildings, 5th ed. – a value of over $100.

    Learn more about the guide

  • Level II Outline

    Level II Outline

    Day 1

    8:00 Introductions
    8:15 Sustainability/Green/LEED/HPB/NZEB
    9:15 Standard 55
    10:00 Break
    10:10 Standard 55 (cont.)
    10:30 Standard 62.1
    11:45 Lunch
    12:30 Building Systems: Example 1 Education Facility
    1:45 Break
    2:00 Building Systems: Example 1 Education Facility (cont.)
    3:00 Break
    3:15 Building Systems: Example 1 Education Facility (cont.)
    4:15 Q&A Session
    4:30 Wrap-up/Adjourn

    Day 2

    8:00 Building Systems: Example 1 Education Facility (cont.)
    10:00 Break
    10:15 Building Systems: Example 2 Multi-Story Office Building
    11:45 Lunch
    12:30 Building Systems: Example 2 Multi-Story Office Building (cont.)
    1:15 Building Systems: Example 3 Multi-Story Office Building
    3:00 Q&A Session/Adjourn

    PDH and Continuing Education Units

    ASHRAE is an approved Continuing Education provider for the American Institute of Architects (AIA) and a USGBC Education Partner. Continuing Education hours earned from ASHRAE courses may be applied toward renewal of state-licensed professionals and maintenance of LEED® professional credentials.

    Attendees of HVAC Design: Level II will earn up to 12 Professional Development Hours (PDHs).

  • Instructors
    Keen_Julia-150x180.jpg

    Julia Keen, Ph.D., P.E., Fellow ASHRAE, HBDP, BEAP

    Julia Keen is a Professor of Architectural Engineering and Construction Science at Kansas State University with a specialty in HVAC, energy codes and integrated building design. She has a Ph.D. in Curriculum and Instruction from Kansas State University where she also received a Bachelor's and Master's degrees in Architectural Engineering. She also owns her own consulting engineering company Keen Designs, PA. Julia is a licensed Professional Engineer and an ASHRAE-certified High-Performance Building Design Professional (HBDP) and Building Energy Assessment Professional (BEAP). She currently serves on ASHRAE’s Planning and Building EQ standing committees, and she is past-chair of Technical Committee 6.1 Hydronics and Steam.


    Joel Primeau-150x180.jpg

    Joel Primeau, Eng., ASHRAE Member, HBDP, LEED® AP

    Joel Primeau is a consulting engineer with over 30 years of HVAC experience. He has lead and assisted teams of engineers and technicians in the design and construction of high-performance, sustainable facilities.

    Joel’s experience spans a wide range of engineering design and construction projects. His expertise is in the design of high-efficiency HVAC systems that enhance indoor air quality and comfort.

    Joel frequently trains engineers, architects and facility managers on the design process, central heating and chilling plant optimization, high-performance HVAC systems, and heat recovery applications.

    Joel is a Licensed Professional Engineer, ASHRAE Certified High-Performance Building Design Professional (HBDP), and a LEED® Accredited Professional. He earned a BEng in Mechanical Engineering from the Royal Military College in Kingston, Canada. After a brief career as an army engineer, Joel has since worked in the HVAC industry in consulting, facilities management and technical sales.

  • Location

    Training Location:
    George Brown College
    Casa Loma Campus - E Bldg.
    146 Kendal Ave
    Toronto, ON, M5R 1M3

Close