Login

Email   Password
  
 

Why Join ASHRAE

ASHRAE Membership

ASHRAE membership is open to any person associated with heating, ventilation, air conditioning or refrigeration. ASHRAE is unique because its membership is drawn from a wide range of disciplines relating to the HVAC&R field. Approximately 51,000 individuals from more than 100 nations belong to the Society.

Discounts on Publications

ASHRAE members earn 15% off publications. Hundreds of titles are available including the complete collection of ASHRAE Standards including 90.1, 62.1 and 189.1.
Click here for information on joining or to join ASHRAE

Develop Leadership Skills

When you join ASHRAE, you are making an investment in yourself. When you become active in the Society by giving your time and sharing your knowledge, you get even more out of that investment.

Network with Industry Professionals

Each month, all over the world, ASHRAE chapters convene for an informational program featuring a speaker or topic that is key to professionals in the industry. Meet with your peers and share ideas.
 
 
Need technical info? Search ASHRAE's Bookstore >
 
 
Resources & Publications
 

Choosing the Right System for Your Home

Buyers Beware: Correctly Sized Air Conditioners Save Money!

When you buy a new air conditioning or heating unit to replace your old one -- or if a completely new system is being installed in your new home -- the installer needs to know how big or, more importantly, how small the unit should be. In order to know exactly how big (or small) it should be, the contractor needs to calculate how much cooling and heating capacity it must have to keep the occupants comfortable. This is called the load of the home.Air Conditioner Hot Climate Consumer Center

The load of the home is partly dependant upon the home’s square footage. However, a true load calculation goes beyond that. An accurate load determination includes building construction; orientation to the sun; “R” value of the insulation; number, size, and placement of rooms; number, size, and placement of windows and doors; types of windows and doors (thermal efficiency); number and arrangement of floors; and the climate.

Residential load calculations make use of mathematical formulas that take all these variables into consideration. They have been computerized, so they’re not as time-consuming as they were in the past.

Determining the load by using rules of thumb almost always leads to an over-sized heating and cooling system, resulting in an increased initial cost, increased monthly utility bills, increased maintenance, and shortened equipment life because the equipment cycles off and on too frequently.

Who Does the Load Calculation?

The contractor you choose to install your new system should be able to perform these calculations. You may ask him for this service. If he doesn’t want to do it, or says it isn’t necessary, you may want to look for a different contractor. In some areas, the local utility will perform a load calculation – check with your local utility.

How Big Is Big?
  • The size of a heating or cooling unit is really the rate at which it supplies heating or cooling, not how big the equipment is.
  • Heating size is given in Btus per hour (Btu/h).
  • Cooling size is given in tons of cooling; 1 ton = 12,000 Btu/h.
  • 'SEER' (Seasonal Energy Efficiency Ratio) indicates the efficiency of the air conditioning unit, not its capacity.

Why it’s Important to Have the Right Sized System

Having the wrong-size heating-cooling system can lead to multiple problems. Over-sizing your cooling system is not a good thing. Without getting into too much detail, your cooling load consists of two parts:

  1. The temperature of the air, called the sensible load.
  2. Moisture or “humidity” in the air, called the latent load.

We’ve all heard the saying, “It’s not the heat; it’s the humidity.” A cooling system that is too big cools down the temperature very quickly, but it does not run long enough to remove sufficient moisture or “humidity” from the air. The result is you feel cool but clammy. Many people then turn down the thermostat to make the air conditioner run longer, increasing the utility bill. In some cases, the insufficient moisture removal resulting from over-sized cooling equipment can lead to mold growth and other types of moisture-related damage.

A correctly sized cooling system runs long enough to “wring” moisture out of the air. This allows you to be comfortable at a slightly higher thermostat setting and allows you to save money on your utility bill. It also takes care of the “mugginess” without making you feel too cold.

Air conditioning systems are sized in “tons,” which is a measure of the rate at which they deliver cooling, not how much they weigh. One ton of cooling is equal to 12,000 Btu/h (British Thermal Units per hour), the rate of cooling required to freeze one ton of ice at 32°F in one day.

It is better to have a system that supplies a little less than the required tonnage of cooling, rather than a system that supplies more than the required tonnage of cooling.

Heating and Cooling Equipment Efficiency Ratings

The table below shows efficiency ratings for good, better and much better heating and cooling equipment.

Equipment

Good

Better

Much Better

Air conditioner

13 SEER

15+ SEER

Variable Speed
16+ SEER

Gas Furnace

78% AFUE

80% AFUE

94% Condensing Furnace

Heat Pump

7.4 HSPF

8.2 HSPF

Variable Speed
9.2+ HSPF

  • SEER means Seasonal Energy Efficiency Ratio and provides an annual measure of the efficiency of the air conditioner. Higher numbers use less energy.
  • AFUE means Annual Fuel Utilization Efficiency. Higher numbers use less energy.
  • HSPF means Heating Seasonal Performance Factor. Higher numbers use less energy.Air Duct

For Existing Homes

For existing homes, the contractor should also check the condition of your ducts. Ducts deliver heated or cooled air to your rooms. Ducts that excessively leak air or that do not deliver the right amount of air to each room can increase operational cost from a few percent to over 50%.