Artificial intelligence (AI) policy: ASHRAE prohibits the entry of content from any ASHRAE publication or related ASHRAE intellectual property (IP) into any AI tool, including but not limited to ChatGPT. Additionally, creating derivative works of ASHRAE IP using AI is also prohibited without express written permission from ASHRAE.

Close
logoShaping Tomorrow's Built Environment Today

2023 ASHRAE Annual Conference
June 24-28, 2023

 

ASHRAE Learning Institute Continuing Education Courses at the 2023 Annual Conference in Tampa, FL   

The ASHRAE Learning Institute will offer 10 courses during ASHRAE’s 2023 Annual Conference.
All courses are approved for continuing education credits toward maintaining P.E. licensure.

Click on the course title for a complete description.

Registration for seminars and courses will be available on site.

For more information on the 2023 ASHRAE Annual Conference, please visit www.ashrae.org/2023annual.

Half-Day Short Courses  |  REGISTER NOW 

  • Each course earns 3 PDHs/AIA LUs.Check with your state for their continuing education credits requirements.

JW Marriott Tampa
50 Water St.
Tampa, FL 33602

Registration fees:
$225 ($170 ASHRAE Member)


Saturday, June 24, 2023

V in HVAC – What, Why, Where, How, and How Much (Includes Basic Requirements of Standard 62.1-2022) (code 60)
8:00 a.m. – 11:00 a.m., JW Marriott Tampa

This course focuses on the basic requirements of ASHRAE Standard 62.1-2022 and covers the scope, application, and multiple compliance paths available in the standard, including the ventilation rate procedure, indoor air quality procedure, and natural ventilation procedure. Many of the standard’s general requirements apply regardless of the procedure used. The different application conditions for the ventilation rate procedure are also described, along with changes particular to the 2022 version of ASHRAE Standard 62.1. This course is highly recommended for all HVAC designers and engineers.

Interested in prepping for the High-Performance Building Design Professional (HBDP) certification exam?
>> See a complete list of HBDP exam task content areas this course addresses.

Instructor: Hoy Bohanon, P.E., Member ASHRAE, LEED® AP


NEW! V in HVAC – Efficiently Improving IAQ using the Ventilation Rate Procedures (Using Advanced Options for Standard 62.1-2022) (code 61)
12:00 p.m. – 3:00 p.m., JW Marriott Tampa

This course provides instruction on how to design a more efficient and ventilation system using the ventilation rate procedure (VRP). The course covers constant volume and VAV recirculating systems for single zone and multiple spaces. It also provides basics for DOAS ventilation design and compares the energy used between the types of ventilation systems. The course also emphasizes the findings and conclusions of the ASHRAE Epidemic Task Force regarding enhanced filtration.

Interested in prepping for the High-Performance Building Design Professional (HBDP) certification exam?
>> 
See a complete list of HBDP exam task content areas this course addresses.

Instructor: Hoy Bohanon, P.E., Member ASHRAE, LEED® AP


NEW! Introduction to Building Decarbonization (code 62)
12:00 p.m. – 3:00 p.m., JW Marriott Tampa

This course describes the primary sources of carbon emissions in buildings and explains the key drivers for decarbonization. Carbon accounting options in buildings, current offset strategies, and electrification technology applications are discussed. Case studies will be offered to demonstrate real-world applications as well as US and world statistics.

Instructor: Drury Crawley, Ph.D., AIA, BEMP, Fellow ASHRAE


Sunday, June 25, 2023

Designing and Operating High-Performing Healthcare HVAC Systems (code 63)
3:30 p.m. – 6:30 p.m., JW Marriott Tampa

This advanced course discusses the interactions of the key elements of high performance in healthcare, infection control, comfort, reliability, safety, maintenance, energy, and sustainability. Numerous energy conservation strategies will be considered in the context of achieving all the goals of a high-performing hospital. For example, the hardware and controls for the setback of temperature and airflow and the relationship to temperature, relative humidity, air exchange, filtration, and pressurization requirements are discussed.

Instructor: Don Burroughs, P.E., Member ASHRAE


Guideline 36: Best in Class HVAC Control Sequences (code 64)
3:30 p.m. – 6:30 p.m., JW Marriott Tampa

This course introduces the current version of ASHRAE Guideline 36, which focuses on variable-air-volume (VAV) systems. The discussion will include the research underlying the current sequences and ongoing and planned future research intended to develop additional advanced sequences for other HVAC system types. In this course, attendees will learn about the ASHRAE Guideline 36 sequences and how they improve energy efficiency, thermal comfort, and indoor air quality. Attendees will also learn how to specify sequences for this guideline.

Interested in prepping for the High-Performance Building Design Professional (HBDP) certification exam?
>> 
See a complete list of HBDP exam task content areas this course addresses.

Instructor: Hwakong Cheng, Member ASHRAE  


Monday, June 26, 2023

NEW! Starting the Path to Net Zero Buildings Using ASHRAE 90.1-2022 (code 65)
2:30 p.m. – 5:30 p.m., JW Marriott Tampa

The 2022 version of 90.1 begins the Standard’s move to become a Net Zero Carbon Emission Code by 2031. This edition adds a new section, Chapter 11 Additional Efficiency Requirements. These additional requirements are above the prescriptive requirements but contain many options for compliance that demonstrate a possible path to net zero buildings. The mechanical section introduces the Total System Performance Ratio (TSPR) as an alternate path for compliance. This offers a whole new path to compliance using a system approach; not prescribed efficiency. The 2022 edition also includes a new informative appendix that can be used with Appendix G if a rating authority wants to use metrics other than energy cost, such as carbon. Appendix G also added Appendix J with performance curves to be used for part load equipment performance. This course covers the changes made in the 2022 edition including ways to reduce energy use in buildings and how you can use these strategies to move toward net zero energy use.

Instructor: McHenry Wallace, P.E., Member ASHRAE, LEED® AP


Humidity Control I: Design Tips and Traps (code 66)
2:30 p.m. – 5:30 p.m., JW Marriott Tampa

In commercial buildings, excess humidity, and moisture promote mold, mildew, and uncomfortable conditions for occupants. This course helps the designer achieve true control of humidity, rather than just its moderation. Topics covered include how to understand and easily estimate the major humidity loads that must govern the design of the system and how to make decisions about equipment size and configuration.

Interested in prepping for the Certified HVAC Designer Professional (CHD) certification exam?
>> 
See a complete list of CHD exam task content areas this course addresses.

Instructor: Mark Nunnelly, P.E., Member ASHRAE, CxA, LEED® AP


Tuesday, June 27, 2023

Humidity Control II: Real-World Problems and Solutions (code 67)
9:00 a.m. – 12:00 p.m., JW Marriott Tampa

Based on ASHRAE's best-selling Humidity Control Design Guide for Commercial and Institutional Buildings, this course includes an in-depth discussion of moisture load calculations and how humidity control can be added to HVAC designs for seven different types of commercial buildings. The course also covers the effects of different humidity levels on thermal comfort, corrosion, mold growth, and airborne microorganisms—information that helps the owner and designer define the optimal humidity control level for each application.

Interested in prepping for the Certified HVAC Designer Professional (CHD) certification exam?
>> 
See a complete list of CHD exam task content areas this course addresses.

Instructor: Mark Nunnelly, P.E., Member ASHRAE, CxA, LEED® AP


Variable Refrigerant Flow Systems and Design & Application (code 68)
9:00 a.m. – 12:00 p.m., JW Marriott Tampa

This course provides an overview of variable refrigerant flow (VRF) technology, including equipment and system types, heating/cooling operation, heat recovery, and the benefits of VRF systems. Also described is the VRF design process, including load profile analysis, unit sizing, ventilation air strategy, refrigerant piping design, and system monitoring/controls. Refrigerant safety considerations are explained, including a discussion of ASHRAE Standards 15 and 34. The course concludes with a focus on human comfort and sustainable design featuring example buildings, ventilation systems, and VRF system layouts.

 Instructor: Pushpinder Rana, P.Eng., Member ASHRAE, LEED® AP


NEW! Fundamentals of Decarbonization Design Systems and Equipment Applications (code 69)
1:00 p.m. – 4:00 p.m., JW Marriott Tampa

This course provides an overview of the topic of building decarbonization with a focus on building heating systems with associated HVAC technologies in new construction. Carbon emissions associated with technologies found in various system designs in buildings are discussed. The course covers the options for low, and no carbon emissions and electrification alternatives.

Instructor: Artorius Reyes, Member ASHRAE


Transfer, Cancellation and Refund Policy:

Course registration fees will be refunded in full if cancellation is received by ASHRAE Customer Service at 800-527-4723 or orders@ashrae.org before 12:00 noon on June 15, 2023. Cancellations received after that date are subject to a $25 cancellation fee. Registrants who do not attend a course or contact ASHRAE prior to the close of business on June 23, 2023, are liable for the entire course registration fee. Registration fees can be transferred by contacting ASHRAE Customer Service at 800-527-4723 or orders@ashrae.org before 12:00 noon on June 23, 2023.


Close